Practical and ideally suitable rubber tile decking for indoor and outdoor sports
CoverPower rubber tile decking is ideally suitable for fitness and body-building halls, outdoors body-building equipment and sports zones, where flooring must withstand especial load. CoverPower rubber tile decking has shock absorption properties, it is soothing, and prevents from obtaining grave physical injuries.
Standard size: 50×50 cm
Tile thickness: 20–50 mm
7 colors: green, red, yellow, dark grey, light grey, brown, and black
The main advantages of decking
- Absorbs shocks and reduces impact of mechanic injuries
- Good surface adherence under any weather conditions
- Maximal moisture drainage
- Sound dampening
- Esthetic appearance
- Selection from 7 colors—a desirable design can be created
- Simple assembling—can be done also by own hands
- Convenient for changing and forming modules—also by parts
- Simply maintained
Standard EN 1177
CoverPower rubber tile comply with the EU Standard EN 1177, thus confirming compliance with one of the most important rubber tile’s parameters—maximal absorption of mechanic injuries and amortization of shock.
3 steps to finished rubber tile decking
- Connect rubber tiles by plastic pins, while inserting them in holes at tile sides.
- Interconnect tiles so that the tiles are decked alternately.
- Continue connecting the tiles, until all designed area is decked.
Practical advices for outstanding result
Do not deck the rubber tiles, if the air temperature is below 4 °C.
For tiles to fully acquire their technical sizes before decking, they 24 hours before assembling should be arranged on even surfaces in 2-3 layers.
Indoors, the rubber tiles should be decked directly in the even surface.
While decking on the ground directly, the base must be specially prepared.
The first layer: chips in thickness of 150 mm. Diameter of the grain of chips must be up to 32 mm.
The second layer: sand and stone mixture or gravel layer in thickness of 33 mm. Diameter of the grain of chips must be at least up to 8 mm.
The third layer: the same mixture, but the grain size must be smaller—up to 5 mm in diameter.
The forth layer (covering layer): – eotextile layer, on which the rubber tiles can be decked.
Attention! All intermediate layers must be firmly compacted.